FXCAM container camera for ACCR applications
It is a critical issue to provide an ACCR system images of appropriate quality level. Our Ultra Low Lux B/W cameras provide high resolution and high intensity for day or night images.
To provide optimal conditions for taking an image, white light LED illuminator(s) device is used with the FXCAM CONTAINER camera. The two illuminators are built up of low power consumption LED's and works as a flash.
Therefore the power consumption is only about 10W while the light emission is 2000W. When the light flashes the camera takes an image of the passing container's code, which will be transmitted through analogue video.
The FXCAM CONTAINER CAMERA is an all in one unit including a camera, auto iris optic and the synchronizer of the 2000 Watts light flash illuminator(s) special designed and optimized for the identification applications.
The effective range of the equipment is from 1.5 meters up to 3.5 meters, but it may vary depending on the environment (weather, sunlight, fog, etc.) conditions and the quality of the container code.
If you have any questions on ACCR, please click here and send us an email
FXCAM CONTAINER unit includes the following components
- High resolution ultra low lux B/W Camera
- Synchronizer unit for the white LED illuminator(s)
- High quality lens
- Weather proof housing
- Wall mountable bracket
- Internal heating with thermostat
The FXCAM has primarily been designed for recognition applications (access control). However the FXCAM can be perfectly applied in many other applications where outstanding image quality is needed.
If you have any questions on ACCR, please click here and send us an email
Technical Specifications of FXCAM container camera
| Specifications of the camera unit |
| Imaging device |
1/3" interline transfer Exview HAD CCD, B&W |
| Picture elements |
768 x 576 pixels (effective PAL/2 768 x 288) |
| Sensing area |
6.3mm (H) x 4.7mm (V) |
| Scanning system |
625 lines, 2:1 interlaced |
| Horizontal resolution |
570 TV lines |
| S/N ratio |
48dB AGC OFF |
| Synch system |
Internal |
| Output signal |
PAL 1Vp-p 75 Ohm |
| Shutter time |
Factory preset (configurable with jumpers)
· 1:10 000 s for even fields
· 1:100 000 s for odd fields |
Weight of camera unit
(without bracket) |
net: 4.5 kg, gross: 6.0 kg |
Dimensions of camera unit
(without bracket) |
240 x 178 x 196 mm |
| Specifications of the illuminator units |
| Type of illuminators |
Visible white LED illuminators |
| Pulse power per illuminator |
2000W, white LED |
| Operating temperature |
-20°C - +65°C |
| Weight of illuminator units (w/o bracket) |
net: 4.5 kg, gross: 6.0 kg |
| Dimensions of illuminator units (w/o bracket) |
240 x 178 x 196 mm |
| Other specifications |
| Cable |
RG 59 coaxial |
| Power supply unit |
Optional |
| Power consumption |
· 24-36V DC or 24-28V AC (50-60Hz)
· 25W-35W (including light flash and heating)
· Reverse polarity protection
· Automatic internal heating with thermostat
|
| IP class |
IP 66 |
| Technical specifications are subject to change without prior notice |
Technical Specifications of FXCAM digital container camera
| Specifications of the camera unit |
| Interface |
Ethernet |
| Camera Sensor |
B&W, Global shutter CMOS |
| Resolution |
752x480, ROI support |
| Lens |
motorized, 6-36mm |
| Iris |
SW adjustable |
| Focus |
SW adjustable |
| Operational range |
up to 6m (due to illumination) |
| Illumination |
Built-in white light LED 40° |
| LED intensity |
SW adjustable time & voltage |
| Synch system |
Internal |
| Frame Rate per second |
60 FPS |
| Communication speed |
~20 FPS |
| Shutter time |
SW adjustable
· 1/100 s max
· 1/30000s min |
| Communication interface |
Ethernet cable |
| Output |
RAW images |
| Ports |
· RS232/ Serial - reserved for extra illuminator
· GPIO trigger - reserved for extra illuminator |
| Power input |
Reverse polarity protection |
| AC |
24-28V AC |
| DC |
30-36V DC |
| Consumption |
16-18W max |
| Compliances |
CE, FCC, RoHS |
| Temperature Range |
-20°C to +55°C |
| IP class |
IP 67 |
| Dimensions (inc.sunshield) |
330 x 157 x 150 mm |
| Weight (inc.sunshield, w/o bracket) |
4.0 kg |
| Default housing color |
RAL 9007 |
| Sunshield |
Included |
| Wall mount bracket |
Included |
| Supported OS |
Windows, Linux |
| Specifications of the illuminator unit(s) |
| Illumination |
White light LED 40° (270pcs) |
| LED intensity |
SW adjustable time & voltage |
| Synch system |
through RS232 |
| Communication interface |
RS232 |
| Power input |
24-28V AC, 30-36V DC |
| Consumption |
8W max |
| Compliances |
CE, RoHS |
| Temperature Range |
-20°C to +55°C |
| IP class |
IP 67 |
| Dimensions (inc.sunshield) |
250 x 157 x 150 mm |
| Weight (inc.sunshield, w/o bracket) |
2.4 kg |
| Default housing color |
RAL 9007 |
| Sunshield |
Included |
| Wall mount bracket |
Included |
| Supported OS |
Windows, Linux |
| Technical specifications are subject to change without prior notice |
Feel free to contact us
If you have any questions on ACCR, please click here and send us an email
KEYWORDS: container code recognition | accr | automatic container code reading | automatic container identification | bic code reading | bic code recognition | iso 6346 | moco code | uic code
